Toshiba B-EX Series Key Operation Specification page 163

The result of mode determination for each control character is as follows.
Control character
SOH
STX
%01
%02
^（Other than ^01/^02）
^01
^02
ESC *c
~
<Supplementary explanation>
1. The automatic determination results of Z Mode and D Mode follow the above table regardless of the
setting of "Alternate Control Code Modes" of D Mode. For details on "Alternate Control Code Modes",
refer to "5.1 Control Code Command Functions" in "D Mode Command Specification".
2. In the automatic determination mode, there may be a case where data specified by a part of download
commands (~ DG / ~ DU / ~ DY in Z Mode) cannot be received normally. In that case, set to the mode
fixed to Z Mode (Z MODE ON or Z MODE ON SET).
Hex
0x01
0x02
0x25, 0x30, 0x31
0x25, 0x30, 0x32
0x5E
0x5E, 0x30, 0x31
0x5E, 0x30, 0x32
0x1B, 0x2A, 0x63
0x7E
158
Result
D Mode
D Mode
D Mode
D Mode
Z Mode
D Mode
D Mode
D Mode
Z Mode