Toshiba B-EX Series Key Operation Specification page 190

Message in the power saving mode
The supported language differs depending on the printer status before the printer enters the power saving
mode.
Multi-language
Japanese/English
Message
Display
Power saving mode display
When the printer is placed in the power saving mode by above-mentioned printer status allowing shift to the
power saving mode, "POWER SAVING MODE" is displayed.
Conditions for allowing usual messages in the power saving mode
When the following occurs in the power saving mode, the power saving mode is terminated.
A key is pressed.
•
The head lever is unlocked or locked in the power saving mode. (This is because there is a message
•
indicating the head lever unlock.)
There is a change in the pause signal line or active signal line of the expansion I/O. (This is because there is
•
a message indicating a pause state.)
Conditions for displaying "POWER SAVING MODE"
When there is no key operations or head lever status change and the power saving mode is continued for 30
seconds, "POWER SAVING MODE" is displayed on the LCD.
When data is saving in the storage area, "POWER SAVING MODE" is displayed in 30 seconds after the
completion of the data save if no printer operation is done.
Online mode (except for manual threshold setting)
System mode, User system mode and manual threshold setting in
the online mode
185