Toshiba B-EX Series Key Operation Specification page 94

Example of TYPE2
[Case 1] Specified number of labels = 5
A label end is detected while the 3rd label is printed.
(1st)(2nd)(3rd)
After issuing the 3rd label completely, the printer stops printing, displaying "NO PAPER 2".
When printing is restarted, first the initial feeding is performed, then the 4th and 5th labels are
printed. Finally, all of 5 labels have been finished.
[Case 2] Specified number of labels = 5
A ribbon end is detected while the 3rd label is printed. Unfinished label length is 30 mm or more.
(1st)(2nd)(3rd)
After the 3rd label is printed for 20 mm, the printer stops printing, displaying "NO RIBBON 2".
When printing is restarted, first the initial feeding is performed, then the 4th and 5th labels are
printed. Finally, the 1st, 2nd, 4th, and 5th labels have been finished.
[Case 3] Specified number of labels = 5
A ribbon end is detected while the 3rd label is printed. Unfinished label length is less than 30 mm.
(1st)(2nd)(3rd)
After issuing the 3rd label completely, the printer stops printing, displaying "NO RIBBON 2".
When printing is restarted, first the initial feed is performed, then the 4th and 5th labels are
printed. Finally, all of 5 labels have been finished.
8.4.2.15 MAXI CODE
・ TYPE1
・ TYPE2
The mode specified by the command may be different from the actual one, depending on the status of
this parameter. Also, the data transmission method differs partly.
For details, refer to the B-EX Series External Equipment Interface Specification
8.4.2.16 XML
・ OFF
・ STD
・ ORACLE
・ SAP
・ STD EXT
・ ORACLE EXT
・ SAP EXT
↑
↑
↑
Compatible with the current version
Special specification
Disabled
Standard specification
Specification for Oracle
Specification for SAP
Standard specification (external memory is used)
Specification for Oracle (external memory is used)
Specification for SAP (external memory is used)
89