Multi Move Settings - Sony MVS-8000SF User Manual

Notes
The Mask function is not supported on the MVE-8000.

Multi Move Settings

Applying the Multi Move effect
1
In the DME menu, select VF2 'Video Modify' and HF2 'Multi Move.'
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Knob
1
2
3
4
a) Specify minus values to stretch the image in the vertical direction, and plus values to
stretch the image in the horizontal direction.
• 16:9 mode
Knob
1
2
3
4
Parameter Adjustment
Center X x-value of shrinking center point –4.00 to +4.00 (SD)
Center Y y-value of shrinking center point –3.00 to +3.00 (SD)
Size Shrinking ratio
Aspect Aspect ratio of shrunken images –100.00 to +100.00
Parameter Adjustment
Center X x-value of shrinking center point –4.00 to +4.00 (SD)
Center Y y-value of shrinking center point –2.25 to +2.25(SD)
Size Shrinking ratio
Aspect Aspect ratio of shrunken images –100.00 to +100.00
Setting values
–12.00 to +12.00 (HD)
–9.00 to +9.00 (HD)
0.00 to 100.00
Setting values
–16.00 to +16.00 (HD)
–9.00 to +9.00 (HD)
0.00 to 100.00
DME Special Effect Operations
a)
a)
565