Sony MVS-8000SF User Manual page 912

Function
Combiner depth
settings (three-
dimensional
crossing function)
(parameter Depth)
Signal format:
720P/50, 1080p/
59.94, 1080p/50
Adding user
texture patterns
(for Spotlighting)
Setting the
interface between
DME and switcher
Setting AUX bus
output/reentry
input
TBC window
center position
Adjustment of
monitor output
video clip level
Monitor output
signal settings
Settings relating
to usage of editor
port
a) Drop shadow is automatically set to off when the function of trail, motion decay, keyframe
b) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304 (round corner) is not
c) When Shaped Video is off.
d) It is not possible to make settings for external input signals.
912
912
Functional Differences With Models of DME
Menu MVE-8000
number
4211 No
7313.1 No
7316.9 No
7337.6 No
7337.7 –
7341.1 No
7343 No
7343.1 No
7344 Fixed to
Common
strobe or window is on.
supported.
MVE-8000A MVE-9000
No Yes
Yes Yes
No Yes
Yes Yes
It is not When using the
possible to DME dedicated
make settings interface, it is not
for DME 1 to 8 possible to make
Ext In. settings for DME
1 to 8 Video/Key.
Yes only when Yes only when
SDI interface is SDI interface is
used.
c)
used.
Yes only when Yes only when
SDI interface is SDI interface is
used. used.
Yes only when Yes
SDI interface is
used.
Yes Yes
See
page 664
"Setting the Signal
Format (Format
Menu)" in Chapter
18 (Volume 3)
"Adding User
Texture Patterns"
in Chapter 18
(Volume 3)
"Setting the
Interface Between
the DME and the
Switcher" in
Chapter 20
(Volume 3)
"Setting the AUX
Bus Output and
Reentry Input" in
Chapter 18
(Volume 3)
"Setting the TBC
Window Center
Position" in
Chapter 21
(Volume 3)
"Adjusting the
Monitor Output" in
Chapter 21
(Volume 3)
"Setting the
Monitor Output" in
Chapter 21
(Volume 3)
"Interfacing With
External Devices
(Device Interface
Menu)" in Chapter
19 (Volume 3)