Sony MVS-8000SF User Manual page 700

1
2
3
4
5
Clearing the start point, stop point, and start delay time settings
in a menu
In the Device menu, use the following procedure.
1
2
700
Control of VTRs, Extended VTRs, and Disk Recorders
In the Device menu, press VF3 'DDR/VTR' and HF1 'Cueup & Play.'
The Device >DDR/VTR >Cueup & Play menu appears.
The status area shows the device number, register number, status
information, current time, start point, stop point, and start delay time.
Using any of the following methods, select the device.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Dev
Carry out any of the following operations as required.
• To set the start point, press [Set] in the <Start TC> group.
• To set the stop point, press [Set] in the <Stop TC> group.
• To set the start delay time, press [Set] in the <Delay> group.
A timecode window appears.
Set the timecode value for the start point, stop point, or start delay time.
Notes
You can enter a start delay time in the range that depends on the signal
format as follows:
00:00 to 59:nn,
where nn = (number of frames per second) – 1 frame.
Press [Enter].
The set start point, stop point, or start delay time is reflected in the status
area.
Press VF3 'DDR/VTR' and HF1 'Cueup & Play.'
Using any of the following methods, select the device for which you want
to clear the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Adjustment
Device number
Setting values
1 to 12