Sony MVS-8000SF User Manual page 542

Example: Moving the right edge position in the "minus" direction.
Softening the inner and outer sides of art edges
1
2
Setting the way in which art edge colors change
1
542
DME Special Effect Operations
Art edge portion
In the Art Edge menu, press [Soft], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Inner H Simultaneously adjust softness of
left and right inner edges
2 Inner V Simultaneously adjust softness of
top and bottom inner edges
3 Outer H Simultaneously adjust softness of
left and right outer edges
4 Outer V Simultaneously adjust softness of
top and bottom outer edges
5 All Simultaneously adjust softness of
all inner and outer edges.
In the <Art Edge Source> group of the Art Edge menu, select the color
pattern to apply to the art edges.
Flat Color: Uses Color 1 (see page 545) as a flat color.
Gradation Matte: Color 1 changes to Color 2 (see page 545) at the border
lines (see step 2 (page 543)).
Rainbow Matte: The color set as Color 1 changes hue into color on the
border lines.
Radial Gradation: Color 1 on the inner side is mixed into Color 2 on the
outer side, according to the shape of the art edge.
Radial Rainbow: The hue of Color 1 on the inner side changes into Color
2 on the outer side, according to the shape of the art edge.
Moving in the
minus direction
Position after Position before
moving moving
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Value of Outer H
shown