Sony MVS-8000SF User Manual page 220

4
5
6
Applying a drop shadow
1
2
3
220
Resizer
Knob Parameter Adjustment
1 H Simultaneously adjust border
width of left and right edges
2 V Simultaneously adjust border
width of upper and lower edges
3 All Simultaneously adjust border
width of all four edges
4 Softness of border
a)
Soft
5 Density Density of border
a) Shared with the drop shadow "Soft" value.
To add an outline, press [Out Line], turning it on.
To adjust the border color, press [Border Color].
Set the color parameters.
For details, see "To apply color to a border" (page 217).
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
Press [Drop Shadow], turning it on.
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format
Knob Parameter Adjustment
1 H Horizontal position of shadow
2 V Vertical position of shadow
3 Size Shadow size
4 a) Softness of shadow
Soft
5 Density Density of shadow
a) Shared with the wide key border "Soft" value.
Setting values
0.00 to +100.00
0.00 to +100.00
Value of H shown
0.00 to +100.00
0.00 to +100.00
Setting values
–8.00 to +8.00
–6.00 to +6.00 (4:3)
–4.50 to +4.50 (16:9)
0.00 to 2.00
0.00 to 100.00
0.00 to 100.00