Crop: Crop the parts that do not fit into the side without shrinking the
picture. You can set the following parameters.
The valid ranges of the parameter values depend on the combination
of signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the
system, as follows.
• 4:3 mode
Knob
Parameter
1
H
2
V
3
Rotation
• 16:9 mode
Knob
Parameter
Adjustment
1
H
Position of left crop
2
V
Position of top crop
3
Rotation
Angle of rotation, when rotated
around the Z-axis of the source
space
The set position becomes the upper left corner of Side V or Side H. The
right and bottom sides of the inserted image are set automatically.
Compress: Images are inserted after being compressed. You can set the
following parameters.
The valid ranges of the parameter values depend on the combination
of signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the
system, as follows.
• 4:3 mode
Knob
Parameter
1
Top
2
Left
3
Right
4
Bottom
Adjustment
Position of left crop
Position of top crop
Angle of rotation, when rotated
around the Z-axis of the source
space
Adjustment
Position of top crop
Position of left crop
Position of right crop
Position of bottom crop
Setting values
–4.00 to +4.00 (SD)
–12.00 to +12.00 (HD)
–3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
0/90/180/270°
Setting values
–4.00 to +4.00 (SD)
–16.00 to +16.00 (HD)
–2.25 to +2.25(SD)
–9.00 to +9.00 (HD)
0/90/180/270°
Setting values
–2.83 to +3.00 (SD)
–8.50 to +9.00 (HD)
–4.00 to +3.83 (SD)
–12.00 to +11.50 (HD)
–3.83 to +4.00 (SD)
–11.50 to +12.00 (HD)
–3.00 to +2.83 (SD)
–9.00 to +8.50 (HD)
Global Effect Operations
667