Sony MVS-8000SF User Manual page 355

5
Start recording at the external device, and immediately after that press
[Yes].
This starts the backup, and when completed a message appears.
6
Stop the recording at the external device, and press the [OK] button.
7
To save the file list in memory, press [File >File Name Data].
The File >File Name Data menu appears.
The name of the file that is saved is fixed (FM_Bkup).
For details, see the section "Overview of File Operations" in Chapter 17
(Volume 2).
Restoring backup data from DDR or VTR
Notes
Before starting the restore operation, it is necessary to select the DDR/VTR
output on the FM input bus.
1
In the Frame Memory menu, select VF6 'External Device' and HF5
'Restore from DDR/VTR.'
The Restore from DDR/VTR menu appears.
2
Press [File >File Name Data], to read the file list from the File Name Data
menu.
For details, see the section "Overview of File Operations" in Chapter 17
(Volume 2).
3
To restore the ancillary data, select any of FM1, FM3, and FM5.
4
In the <Restore Enable> group, select either of the following.
Clip/Still: Data from the first board (still images and clips)
Ext Clip: Data from the second board (extended clips)
5
In the [Restore Type] group, press either of the following.
Replace: Replace the existing frame memory data with the recalled data
Append: Add to the existing frame memory data.
Notes
If you selected "Ext Clip" in step 4, "Append" is selected automatically.
Managing Images Using a DDR/VTR
355