Sony MVS-8000SF User Manual page 850

Block
Downstream key control block
Transition control block
Utility/shotbox control block
Menu control block
a) In the case of an event that inserts or deletes a key by an independent key transition, the key state
at the time of event registration (inserted or not inserted) is also saved in the macro. When the
macro is executed, the event is only replayed if the key state matches the saved state. (Example:
For a macro with an event that deletes a key, when the macro is executed, if the key is inserted
it is deleted, but otherwise nothing occurs as concerns keying.)
b) Macro attachment can be set with these buttons only when they are assigned to [Play/Stop/Cue]
in the Engineering Setup >Panel >Config >Program Button >Transition Module menu and when
the [DEV] button in the device control block is lit.
Notes
• After setting a macro attachment to a cross-point button of the bus assigned
by AUX delegation setting, if in the Setup menu you change the bus
assignment to the button, the macro attachment setting disappears.
• After setting a macro attachment to a button for which you can perform
function replacement or function assignment, if you change the function
assignment to the button, the macro attachment setting disappears.
• After setting a macro attachment to a cross-point button in the cross-point
control block, if you change the function assignment to the button, the macro
attachment setting disappears.
Enabling and disabling macro attachment
You can temporarily disable the macro attachment settings. When a macro
attachment is disabled, pressing the button does not cause execution of the
assigned macro.
You can enable or disable macro attachments for the individual control panels.
Assign the function to enable or disable macro attachments to a button in the
utility/shotbox control block or a user preference button, and turn the button on
and off as required.
850
Macro Attachment Assigning
Button
• [DSK1 ON] to [DSK4 ON] buttons
a)
• [TAKE] button
• [MIX], [WIPE], [DME], and [CUT] buttons
b)
• [PTN LIMIT] button
• [LIMIT SET] and [KF] buttons
• [NORM], [NORM/REV], and [REV] buttons
• [MIX], [NAM], [SUPER MIX], [PST COLOR MIX],
[WIPE], and [DME] buttons
• [MIX], [WIPE], and [DME] buttons
• [ALL], [KEY PRIOR], [BKGD], and [KEY1] to
[KEY4] buttons
• [AUTO TRANS] button
• [CUT] button
• [KEY1 TRANS] to [KEY4 TRANS] buttons in the
independent key transition control block
Memory recall buttons
[PREFS 1] to [PREFS 16] buttons
a)
b)
b)
a)