Video Process Memory - Sony MVS-8000SF User Manual

Making the adjustments
Adjust VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, and HUE DELAY
in the following menus.
Applicable bus
M/E-1 bank
PGM/PST bank
Frame memory source 1 and 2 buses
Aux 1 to 48 buses

Video Process Memory

When using video process adjustments for an image effect on a bus, this
function saves the final values for each pair number for the signals. The video
process on/off setting is not saved.
When you change the adjustments the values are automatically saved, and
these last values are recalled when the pair number is selected.
In other words, by switching video process memory on, regardless of the video
process information for each bus, you can carry out video process adjustments
for each input signal.
The parameters saved are as follows.
Switch the video process memory on or off in the Setup menu.
For details of setting operations, see "Settings Relating to Keys, Wipes, Frame
Memory and Color Correction (Key/Wipe/FM/CCR Menu)" in Chapter 20
(Volume 3).
380
Video Process
Key fill buses for keys
1 to 4
Background A and B
buses
Utility 1 and 2 buses
Key fill buses for
DSK1 to DSK4
Background A and B
buses
Utility 1 and 2 buses
VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, HUE DELAY
Menu used for operation See page
M/E-1 menu
Video Process menu
PGM/PST menu
Video Process menu
Frame Memory menu
AUX menu
page 195
page 381
page 195
page 381
page 311
page 375