Clip Playback - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Using the arrow keys or turning the knob, scroll the file thumbnail display.

Press the thumbnail of the clip you want to recall.

Press [Recall].

This recalls the clip file, which is assigned to the FM you selected in step 2.

In pair mode, if a clip is selected, the main file is output to FM1, and the

sub file to FM2. In single mode, when only one of FM1 and FM2 is

selected, the front file on the thumbnail is output.

To recall in direct recall mode

Direct recall means that pressing a thumbnail immediately recalls the file.

In this mode, only the front thumbnail file is recalled.

In step 7 above, instead of pressing [Recall], press [Direct Recall].

Press the thumbnail for the file you want to recall.

This immediately recalls the file.

To display the subsidiary file in front

With the direct recall mode on, press [Sub Display], turning it on.

To search the clip file by file name

Press the [Find] button.

For details, see "To search by file name" (page 314) in Chapter 7.

Clip Playback

You can play a recalled clip by a menu operation or by using the device control

With a pair file recalled, it is possible to set [Pair] to Off and carry out a single

file operation, but if you then set [Pair] to On again, the output of frame

memory may be black. In such cases it is necessary to recall the pair file once

Thumbnail display

Setting values

1 and upwards

Frame Memory Clip Operations