Sony MVS-8000SF User Manual page 591

• When Shape mode is selected
Knob Parameter
1 Amp R
2 Freq R
3 a)
Offset R
4 b)
Speed R
5 Shape
Knob Parameter
1 Aspect
2 Angle
a) Set when Lock is on.
b) Set when Lock is off.
c) Setting for SD 4:3, SD 16:9
d) Setting for HD 4:3, HD 16:9
e) 1 (Circle): Circle
2 (Rectangle): Rectangle
3 (Star): Star
4 (Heart): Heart
To limit the direction in which modulation is applied
By pressing [Plus Only], turning it on, you can limit the direction in which
modulation is applied (the direction in which the image expands) to the plus
direction only.
To set the ripple center point
1
Press [Position], turning it on.
2
Set the following parameters, depending on the selected modulation mode.
• When Shape is selected
Knob Parameter
1 H
2 V
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Parameter group [1/2]
Adjustment
Ripple amplitude
Ripple frequency
Direction in which to offset ripple
phase and amount of movement
Ripple direction and speed
Ripple shape
Parameter group [2/2]
Adjustment
Ripple aspect ratio
Ripple angle
Adjustment
Ripple center point in
horizontal direction
Ripple center point in vertical
direction
Setting values
0.00 to 100.00
0.00 to 100.00
c)
–8.000 to +8.000
–32.000 to +32.000
–100.00 to +100.00
e)
1 to 4
Setting values
–100.00 to +100.00
–8.000 to +8.000
Setting values
a)
–5.000 to +5.000
b)
–20.000 to +20.000
a)
–3.000 to +3.000
b)
–12.000 to +12.000
DME Special Effect Operations
d)
591