4
5
6
Adjusting the size of the flex shadow
1
548
DME Special Effect Operations
Knob
Parameter
Adjustment
4
Softness of shadow
a)
Soft
5
Density
Density of shadow
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
• 16:9 mode
Knob
Parameter
Adjustment
1
H
Move shadow horizontally
2
V
Move shadow vertically
3
Size All
Enlarge or shrink horizontally and
vertically
4
a)
Softness of shadow
Soft
5
Density
Density of shadow
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
In the <Flex Shadow Source> group, select the signal to use for the flex
shadow.
External: Generate the shadow using an input signal.
Internal: Generate the shadow using a full-size key signal.
In the <Flex Shadow Fill> group, select the signal to insert in the flex
shadow.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 558)
Ext Video: an external video signal input to the Ext IN connector
Only if Flat Color is selected in step 5, adjust the following parameters.
Knob
Parameter
Adjustment
1
Luminance
Luminance
2
Saturation
Saturation
3
Hue
Hue
In the Flex Shadow menu, press [Size], turning it on.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
Value of Size H (see
page 549) shown
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00