Masks - Sony MVS-8000SF User Manual

Knob
3
4

Masks

There are two masks, which can be used to mask off unneeded parts of a key
or background, or to remove defects, and these are known as the main mask and
subsidiary mask.
You can either use the main mask and subsidiary mask independently, or at the
same time.
Using the main mask
For example, to use the main mask for key 1 on the M/E-1 bank, use the
following procedure.
1
In the M/E-1 >Key1 menu, select HF3 'Main Mask.'
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
• When a box is selected
Knob
1
2
3
4
5
Parameter Adjustment
Hue Hue
Density Density
Parameter Adjustment
Top Top position
Left Left position
Right Right position
Bottom Bottom position
Soft Box softness
Setting values
359.99 to 0.00
0.00 to 100.00
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
0.00 to 100.00
Key Setting Operations Using Menus
189