Sony MVS-8000SF User Manual page 670

Combiner channel
selection
Ch2+Ch3+Ch4
Ch1+Ch2+Ch3+Ch4 Valid
Taking Ch1 Shadow as an example, the following explains the procedure for
applying the Drop Shadow effect.
1
2
3
4
670
Global Effect Operations
Button
Ch1
Shadow
Press [Ch1 Shadow], turning it on.
The Drop Shadow effect is enabled, and channel 2 becomes the channel for
the shadow to the image. You can adjust the position and density of the
shadow with the knobs.
Notes
The flex shadow function cannot be enabled when Drop Shadow is
enabled.
However, the flex shadow function is not supported on the MVE-8000/
8000A.
Set the parameters.
Knob Parameter
1 Position H
2 Position V
3 Density
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
In the <Ch1 Shadow Source> group, select the shadow source signal.
Video: Select Ch2 video input as the shadow.
Flat Color: Select a matte color as the shadow.
When you select Flat Color in step 3, adjust the parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
Ch2 Ch3
Shadow Shadow
Valid Valid
Valid Valid
Adjustment
Horizontal shadow position
Vertical shadow position
Density of shadow
Adjustment
Luminance
Saturation
Hue
Ch1+Ch2 Ch2+Ch3
Shadow Shadow
Valid
Valid
Setting values
a)
–8.00 to +8.00
b)
–32.00 to +32.00
a)
–8.00 to +8.00
b)
–32.00 to +32.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00