Sony MVS-8000SF User Manual page 595

To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following procedure.
1
To make transition settings, press [Transition] and set the following
parameters.
Knob
1
2
3
2
To set the partition method, press [Partition] and set the following
parameters.
Knob
1
2
3
Blind settings
There are two modes: Bar and Wedge. You can set the number of rotations by
blocks, the perspective, the width and position of blocks, the direction, the
center position, and other parameters.
To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
In the <Mode> group, select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set the following
parameters.
Knob
1
2
3
To set the partition method, press [Partition] and set the following
parameters.
Parameter Adjustment
Transition Degree of transition
Random Degree of randomness in distance
moved by each block
Angle Direction of movement
Parameter Adjustment
Width Width of partition
Random Degree of randomness in partition
width
Angle Partition angle
Parameter Adjustment
Rotation Number of rotations of the blocks
Perspective Degree of randomness in distance
moved by each block
Setting values
0.000 to 100.000
–100.000 to
+100.000
–8.000 to +8.000
Setting values
0.000 to 100.000
0.000 to 100.000
–8.000 to +8.000
Setting values
–8.000 to +8.000
0.000 to 100.000
DME Special Effect Operations
595