Key Type Setting - Sony MVS-8000SF User Manual

Key Type Setting

Setting the key type in a menu
1
2
3
4
168
Key Setting Operations Using Menus
In the M/E-1 >Key1 menu, select HF1 'Type.'
The Type menu appears.
In the <Key Type> group, select the key type.
Luminance: luminance key
Linear: linear key
Chroma: chroma key
Color Vector: color vector key
Wipe Pattern: wipe pattern key
Key Wipe Pattern: key wipe pattern key
For the selected key type, you can now set the parameters.
For an overview of the key types, see "Key Types" (page 160).
Carry out the following settings as required, depending on the key type
selected in step 2.
To enable clean mode (see page 160) for a luminance key, linear key or
color vector key: Select [Clean Mode] so that it is set on.
When clean mode is enabled, key fill is added to the background
without cutting out with key source.
When chroma key is selected: Select [Chroma Adjust] to access the
Chroma Adjust menu (see page 173), and make the required settings.
When a wipe pattern key is selected: In the M/E-1 >Wipe menu (see
page 229), select the pattern and set any modifiers, then return to the
M/E-1 >Key1 menu.
When a key wipe pattern key is selected: In the M/E-1 >Key1 >
Transition >Wipe Adjust menu (see page 254), carry out pattern
selection and modifier setting, then return to the M/E-1 >Key1 >Type
menu.
Notes
For a wipe pattern selected for a wipe pattern key or key wipe pattern key,
the [Edge] and [Direction] modifier settings are not available.
Set the parameters.