Multi Move Settings - Sony MVS-8000X User Manual

Knob Parameter Adjustment
2 V
3 All
When Video/Key is selected (with SDI-interfaced
DME)
Parameter group [1/2]
Knob Parameter Adjustment
1 V/K H
2 V/K V
3 V/K All
4 Video All
5 Key All
Parameter group [2/2]
Knob Parameter Adjustment
1 Video H
2 Video V
3 Key H
4 Key V
When video is selected (with SDI-interfaced DME)
Knob Parameter Adjustment
1 H
256
Applying Special Effects (Effects on the Overall Video Signal)
Setting values
Vertical 0.00 to 100.00
defocusing of
video and
key signals
Horizontal H value shown
and vertical
defocusing of
video and
key signals
Settings values
Horizontal Video H value
defocusing of shown
video and
key signals
Vertical Video V value
defocusing of shown
video and
key signals
Horizontal Video H value
and vertical shown
defocusing of
video and
key signals
Horizontal Video H value
and vertical shown
defocusing of
video signal
Horizontal Key H value shown
and vertical
defocusing of
key signal
Settings values
Horizontal 0.00 to 100.00
defocusing of
video signal
Vertical 0.00 to 100.00
defocusing of
video signal
Horizontal 0.00 to 100.00
defocusing of
key signal
Vertical 0.00 to 100.00
defocusing of
key signal
Settings values
Horizontal 0.00 to 100.00
defocusing of
video signal
Knob Parameter Adjustment
2 V Vertical
defocusing of
video signal
3 All Horizontal
and vertical
defocusing of
video signal
When Key is selected (with SDI-interfaced DME)
Knob Parameter Adjustment
1 H Horizontal
defocusing of
key signal
2 V Vertical
defocusing of
key signal
3 All Horizontal
and vertical
defocusing of
key signal
Masking the Blur effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Multi Move Settings

Applying the Multi Move effect
1
In the DME menu, select VF2 'Video Modify' and
HF2 'Multi Move.'
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
3
Set the parameters.
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
4:3 mode
Knob Parameter Adjustment
1 Center X x-value of
shrinking
center point
2 Center Y y-value of
shrinking
center point
3 Size Shrinking
ratio
Settings values
0.00 to 100.00
H value shown
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
–4.00 to +4.00 (SD)
–12.00 to +12.00
(HD)
–3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
0.00 to 100.00