Sony MVS-8000SF User Manual page 678

Setting an action
1
2
3
4
5
678
Control of P-Bus Devices
In the Device menu, press VF2 'P-Bus Timeline.'
The Device >P-Bus Timeline menu appears.
The status area shows two lists. The left list is for setting combinations of
devices and actions. The settings in this list will be saved as keyframe point
data. The right list is for selecting the action.
Select the P-Bus device for which you want to set an action, by using any
of the following methods to specify the device ID.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 ID
Using either of the following methods, select the action.
• Press directly on the list on the right of the status area.
• Turn the knob.
Knob Parameter
2 Action No
a) 1: Off (no specification)
2: Store
3: Recall
4: Trigger
If in step 3 you selected 2 (Store), 3 (Recall), or 4 (Trigger), turn knob 3 to
select the register number or trigger number.
The indication for knob 3 changes to reflect the selection of Store, Recall,
or Trigger.
Knob Parameter
3 Store No
3 Recall No
3 Trigger No
The setting is reflected in the list on the right of the status area.
Press [Set].
For the device selected in the list on the left of the status area, this sets the
action specified in step 4.
Adjustment
Device number
Adjustment
Action
Adjustment
Register number for Store
Register number for Recall
Trigger number
Setting values
0 to 23
Setting values
a)
1 to 4
Setting values
1 to 250
1 to 250
0 to 15