Sony MVS-8000SF User Manual page 616

Setting the bar shape of the highlight area
When you select [Bar] or [Preset] in step 3 of "Applying the Lighting effect"
(page 614), use the following procedure to set the shape of the bar.
1
2
616
DME Special Effect Operations
b) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Notes
The Total Ambient parameter is not supported on the MVE-8000/8000A.
Shade area
Highlight area
The three regions for which the light intensity can be set
Turn [Light Modify] on.
Adjust the following parameters.
Knob Parameter
1 X
2 Y
3 e)
Angle
4 Width
5 Soft
a) For SD 4:3
b) For SD 16:9
c) For HD 4:3
d) For HD 16:9
e) There are some nonlinear effects for which Angle cannot be used.
Adjustment
X-value of bar center point
Y-value of bar center point
Angle of bar
Width of bar
Softness of edges
Ambient area
Setting values
a) b)
–8.00 to +8.00
c)
–24.00 to +24.00
d)
–32.00 to +32.00
a)
–6.00 to +6.00
b)
–4.50 to +4.50
c) d)
–18.00 to +18.00
–8.00 to +8.00
0.00 to 100.00
0.00 to 100.00