Recalling Still Images; Clip Operations; Creating A Clip (Recording) - Sony XKS-C9111 User Manual

6
In the <Freeze> group, select one of the following.
Frame: Execute a frame freeze, saving a still image
file in memory.
Field: Execute a field freeze, saving a still image file
in memory.
To enable V/K mode
Press [V/K Mode], turning it on.
For details, see "V/K mode" (page 171).
To save still image files in storage
Select a file stored in memory in the folder/file selection
area. A confirmation message appears.
Select [Yes] to start saving the file in storage.
Note
A file within a locked folder cannot be saved in storage.

Recalling Still Images

Selecting a still image file in memory recalls the file on an
FM output.
1
Open the Frame Memory >Clip/Still >Recall menu
(2111).
2
Select the target FM output for operation in the FM
output selection area.
For details about the method of operation, see
"Selecting an FM Output" (page 174).
3
Select the file to recall in the folder/file selection area.
You can also enter the name of a folder/file to search
for (see page 175).
A light-blue frame is applied to the selected file, and
the image is recalled on the target FM output.

Clip Operations

Creating a Clip (Recording)

Assigning a frame memory source bus signal to an FM
output and then executing recording captures a clip and
saves it in memory.
Notes
• When the system is powered off, files and folders in
memory are lost. Save any required files in storage.
• When the available number that can be saved in each
signal format equals the following values, the record
operation cannot be executed.
- 1080PsF, 1080i: "1" ("3" in pair mode)
- 1080P, 720P: "3" ("7" in pair mode)
- 3840×2160PsF: "7" ("15" in pair mode)
- 3840×2160P: "15" ("31" in pair mode)
1
Open the Frame Memory >Clip/Still >Record menu
(2113).
2
Select the target FM output for operation in the FM
output selection area.
For details about the method of operation, see
"Selecting an FM Output" (page 174).
3
Press [Through], turning it on.
The input image on the frame memory source bus is
output on the target FM output.
Note
The output on the FM output is delayed by one frame.
4
Select the save destination folder in the folder/file
selection area.
To create a folder
Press [New], and enter the folder name using the
keyboard window.
Note
A folder cannot be created within a locked folder.
5
Set the name of the file to create.
Press [Name], and enter the file name using the
keyboard window. The specified file name is
displayed in the status area in the center of the screen.
6
Press [Record Start] at the position you want to start
recording.
177