Organizing the songs you've recorded
Saving a song (Song Store)
The BR-1180/1180CD can save the following contents as
song data.
• Recorded data
• Mixer settings
• Insert Effect song patches
(S01–S50) * guitar bank: S01–S100
• Mastering Tool Kit song patches (S01–S19)
• Speaker Modeling song patches (S01–S22)
• Rhythm Arrangements
• Loop Phrase sequences
• Loop Effects
• Tuner
• Utility (excluding LCD contrast and disk
parameters)
This data is not saved immediately after recording, writing
patches, and other such operations, but is saved on the hard
disk when songs are saved, and when the power is
automatically turned off.
Ordinarily, if a situation calls for it, a message appears in the
display prompting you to confirm that you want to save the
data, so you need not pay particular attention to this, but if
you want to save a song to the hard disk in its current state,
use the following procedure.
80
1. Press [UTILITY].
2. Use [CURSOR] to select the "SONG" icon, and press
[ENTER].
fig.R12-01
3. Use [CURSOR] to select the "STORE" icon, and press
[ENTER].
fig.R12-13
The display will ask "Save Current?"
fig.R12-70
4. If you wish to store the recorded data for the current
song, the song patches, and the mixer settings, press
[YES].
If you decide not to store the data, press [NO].