Switching The Signal Indicated In The Level Meter (Pre-/Post-Fader); Initializing The Br-1180/1180Cd's Settings (Initialize) - Boss BR-1180 Owner's Manual

What is SCMS?
SCMS stands for Serial Copy Management System. This
is a function of consumer digital audio devices such as
DAT recorders MD recorders that protects the copyright
of the producer by prohibiting second-generation and
subsequent copies from being made digitally. If digital
connections are made to a digital recorder that has this
function, SCMS flags will be recorded along with the
digital audio signals. Digital audio data that contains this
data cannot be recorded again via a digital connection.
Switching the signal indicated in the
level meter (Pre-/Post-Fader)
The BR-1180/1180CD initially brings up the screen in which
the level meters are displayed (the top screen). In this case,
each track's level meter indicates the level after the signal
passes through the fader (post-fader).
If you wish to view the pre-fader levels (the level of the
sound before the fader), perform the following procedure.
1. Press [UTILITY].
2. Use [CURSOR] to select the "SYSTEM" icon, and press
[ENTER].
fig.R19-07
3. Use [CURSOR] to move the cursor to "Level Disp.,"
then rotate the TIME/VALUE dial to switch to "PRE
FADER."
fig.R19-82
Other Convenient Functions
4. Press [EXIT] to return to the previous screen.
To return to the post-fader meter screen, use the same
procedure to switch the setting to "PST FADER."
5. Press [EXIT] several times to return to the top screen.
Initializing the BR-1180/
1180CD's settings (Initialize)
You can initialize the BR-1180/1180CD's current settings.
The following parameters can be initialized.
Global parameters
• Tuner parameters
• System parameters
• Sync parameters
• MIDI parameters
• Marker parameters
• Tempo map parameters
• Scene parameters
• Scrub/Preview parameters
Effect patch data
• User patches of all banks
• Mastering Tool Kit
Mixer parameters
(PAN, EQ, CHORUS/DELAY, REVERB)
A list of the initial settings for each parameter is given in
the "Parameter List" (p. 174).
1. Press [UTILITY].
2. Use [CURSOR] to select the "INITIALIZE" icon, then
press [ENTER].
fig.R19-08
133