Saving Speaker Modeling Settings; Copying Speaker Models - Boss BR-1180 Owner's Manual

Reproducing the characteristics of various monitor speakers (Speaker Modeling)

Saving speaker modeling settings

This procedure names and saves edited speaker modeling
settings.
1. With the speaker modeling block diagram in the
display, press [CURSOR] to move the cursor to
"NAME," then press [ENTER].
The speaker modeling name can now be edited.
fig.R06-07
2. Use [CURSOR] and the TIME/VALUE dial to input the
name.
3. When you have finished inputting the name, press
[EXIT] to go back one screen (the speaker modeling
block diagram).
4. Use [CURSOR] to move the cursor to "WRITE," then
press [ENTER].
fig.R06-08
5. Rotate the TIME/VALUE dial to select the speaker
modeling write destination.
fig.R06-09
* You cannot specify a Preset patch as the write destination.
6. When you have determined the speaker modeling
write destination, press [ENTER].
When writing of the speaker modeling is finished, the
speaker modeling settings screen returns to the display.
60

Copying speaker models

1. In the speaker modeling settings screen, press
[CURSOR] to move the cursor to "COPY," then press
[ENTER].
The speaker modeling copy screen appears.
fig.R06-10
2. Use [CURSOR] and the TIME/VALUE dial to select the
speaker modeling copy destination.
fig.R06-11
* You cannot specify a Preset patch as the copy destination.
3. Once you've determined the copy destination, press
[ENTER].
When the copy is finished, the speaker modeling settings
screen returns to the display.