Boss BR-1180 Owner's Manual page 69

Example 4: Track Move + Insert
fig.R10-16
A
A' A'
START END TO
* With the Track Copy + Insert, you cannot select the same
track for the source and destination.
fig.R10-17
move source
(tracks/V-tracks) move destination
name
(move source)
name
(move destination)
4. Use [CURSOR] and the TIME/VALUE dial to select the
tracks/V-tracks of the move source and move
destination.
* If a name has been assigned to the selected track, the track
name will be displayed.
5. If there are other tracks that you wish to move using the
same settings (range, location), press CURSOR [
several times to move the cursor to the following
location, and rotate the TIME/VALUE dial.
fig.R10-18
Now you can specify the new move source and move
destination tracks.
In this case, it will not be possible to select move
destination tracks that have already been selected as
move source tracks.
If there are any tracks for which you wish to cancel the
Move operation, rotate the TIME/VALUE dial to the left
and make the display read "?."
* The Move operation will not be executed for lines which
contain a "?."
* Tracks 9/10 are stereo tracks; they cannot be selected individually.
Editing the performance—Track Editing
6. Specify the move region and move destination location.
Use CURSOR [
press [ENTER], and the Track Move (MEAS) screen
appears.
fig.R10-19
Time
At this time, you can select "DISP" and press [ENTER] to
switch between ways to specify the location (measures,
time, markers).
Set the following items.
START (start point):
Specify the starting location of the move source data.
END (end point):
Specify the ending location of the move source data.
TO (to point):
Specify the reference location of the move destination.
FROM (from point):
Specify the location of the move destination within the
"TO" point. Normally you will set this to the same
location as the "START" point.
* If, after specifying the above items as time locations, you then
switch to the measure or marker display, a "+" symbol may
appear, indicating that the currently displayed locations are
different than the actual locations. If you are specifying these
]
items as measure or marker locations, you can eliminate this
discrepancy by using the TIME/VALUE dial in each screen to
specify the location.
* If you want the move range to be from the beginning of the
song to the end, select the "ALL" icon and press [ENTER].
7. When you have finished making settings, use
[CURSOR] to move the cursor to the "GO," and press
[ENTER].
Move Event is executed.
8. Press [EXIT] several times to return to the top screen.
] to move the cursor to "LOC" and
69