Playing More Than One Song Continuously (Song Chain); Jumping To The Last Measure Of The Song - Boss JamStation JS-5 Owner's Manual

Chapter 2 Playing a Song
Playing More Than One Song
Continuously (Song Chain)
You can have up to ten songs played back to back in a
performance. This function is called Song Chain.
* You can combine User Songs in the unit and on a memory
card for continuous play.
fig.RE02-13
1
ROCK 1 USER
No. 001 No. 002
1. At the Song screen, press [CURSOR
SONG CHAIN MODE."
fig.RE02-14
2. Press [ENTER].
The Song Chain Setting screen appears.
fig.RE02-21
Order
Song number
3. Select the songs to be played consecutively, and the
order in which you want them to play.
Press [CURSOR] to set the order of the songs (from 1 up
to 10).
Press [SONG/STYLE BANK] and select a category.
Turn [VALUE] to select the Song Number.
If you press [ERASE] ([SHIFT] + [UTILITY]), the
currently-displayed song will be canceled, and will
become a blank. If you press [ERASE] while a blank is
shown, the subsequent songs will be moved forward to
fill the gap.
If you press [INSERT] ([SHIFT] + [PART]), a blank will be
inserted. If you insert a blank when ten songs are
already specified, the tenth song will be canceled.
* To cancel, press [EXIT].
* The following appears when no song is selected.
fig.RE02-23
64
2 10
ROCK 3
No. 003
] to select "5
Category
Song name
4. When you've finished making the settings, press
[CURSOR ] to return the orderof songs to "1," then
press [RESET].
5. Press [START].
The Song Chain plays in the set order, beginning with
the initial song selection. The display will change,
showing the next song, as each successive song in the
chain begins playing.
* When a screen other than the Song Chain settings screen is
displayed, the Song Chain function is disabled, and a
consecutive performance cannot be played.
* Then may be a slight pause until the next song starts.
By pressing [SHIFT] + [SONG] in the Song screen, you can
jump to the Song Chain setting screen.
Jumping to the last measure
of the song
You can jump to the last measure of the currently selected
song.
1. With song playback stopped, press [SHIFT] + [FWD].
The last measure will appear in the left display.