Recording/Playing Back A Song; Turn On The Br-1180/1180Cd; Selecting The Song To Be Recorded; Recording A New Song - Boss BR-1180 Owner's Manual

Digital recording studio
Hide thumbs Also See for BR-1180:
Table of Contents

Advertisement

Recording/playing back a song

(1) Turn on the BR-1180/1180CD

As described in "Connecting peripheral devices" (p. 26) and
"Turn on the BR-1180/1180CD" (p. 27), complete the
appropriate connections and then turn on the power.
(2) Selecting the song to be
recorded
If more than one song is already entered, the most recently
saved song is selected automatically.
To record a new song, follow the procedure given below.

Recording a new song

A maximum of 999 songs can be created on a single
partition. When using multiple drives (partitions), you
can create up to 999 songs on each partition.
For more on drives, refer to "Initializing the hard disk"
(p. 135) and "Viewing information about the hard disk"
(p. 136).
About data types
When you record a new song, the BR-1180/1180CD allows
you to set the data type. This enables you to select the
combination of audio quality and recording time that is most
suitable for the material you are recording. The following
data types are available.
* The data type of a song cannot be changed after it is created.
LIN (Linear):
Uncompressed (linear 16-bit) mode. Provides the highest
quality recording and playback.
MT1 (Multitrack 1):
Allows twice the recording of "LIN" while preserving high-
quality sound.
MT2 (Multitrack 2):
Standard recording type. Permits extended recording times
without sacrificing sound quality.
LV1 (live1):
For recordings that will take longer than what can be
provided with the MT2 data type. This is the most suitable
setting when there is little space remaining on the hard disk.
LV2 (live 2):
Of the five data types, this provides the longest recording
time.
Recording time
The amount of time you can record to the internal hard disk
with each of these settings is shown below (with the 20 GB
hard disk, using only one track).
Data type
Recording time
LIN
Approx. 60 hours
MT1
Approx. 120 hours
MT2
Approx. 160 hours
LV1
Approx. 190 hours
LV2
Approx. 240 hours
* The recording times shown above are approximate. Depending
on the number of songs, the allowable recording time may
decrease. Additionally, due to the performance of the hard disk
itself, the actual amount of hard disk space that can be used
may vary, even with the same 20 GB hard disk.
* The recording times shown above are for when only one track
is used. For example, if you record on all ten tracks, the
recording time for each track will be 1/10th of the time shown
above.
Procedure
1. Press [UTILITY].
2. Use CURSOR [
] [
] to select the "SONG" icon, and
press [ENTER].
fig.Q02-01
3. Use CURSOR [
] [
] to select the "NEW" icon, and
press [ENTER].
fig.Q02-02
The display will indicate "Data Type."
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Br-1180cd

Table of Contents