Canceling Song Protect; Naming Songs (Song Name) - Boss BR-1180 Owner's Manual

* If you execute Song Erase without saving, all recording
and editing operations that you performed on the current
song, the current state of the mixer section, and any
changes to the song patch will not be saved.
5. The Song Protect operation will be executed.
"Complete!" appears in the display, and you are
returned to the top page.
* When a song is protected, the display will show the song
protect symbol.
fig.R12-10

Canceling song protect

1. Perform steps 1–3 of "Protecting a song."
The display will ask "Protect Off/On?"
2. Use [CURSOR] to select the "OFF," and press [ENTER].
Song Protect is cancelled, "Complete!" appears in the
display, and you are returned to the top page.
Organizing the songs you've recorded

Naming songs (Song Name)

When you create a new song, it will automatically be given a
name such as "SONG 001." However, the use of such non-
descriptive names can make it difficult to tell which song is
which. With your BR-1180/1180CD, you can use Song Name
to give each song a name, which helps you manage and
organize your songs.
1. Press [UTILITY].
2. Use [CURSOR] to select the "SONG" icon, and press
[ENTER].
fig.R12-01
3. Use [CURSOR] to select the "NAME" icon, then press
[ENTER].
fig.R12-11
The name of the song (Song Name) will be displayed.
fig.R12-12
4. Use [CURSOR] to move the cursor to the character you
want to change.
5. Rotate TIME/VALUE dial to select the character.
6. Press [EXIT] several times to return to the top screen.
79