Error Message List - Boss BR-1180 Owner's Manual

Error message list

Blank Disc!
Cause: Data is not written to the CD-R/RW drive.
Action: Load a CD-R/RW disc that has data written on it.
Cannot Select Same Track!
Cause: You attempted to select the same track more than
once during Track Edit (p. 66–74), WAV/AIFF
Export (p. 118), or another procedure.
Action: Select a different track.
CD Full!
Cause: The CD-R/RW disc is full, and no more data can
be written to it. Additionally, when creating an
audio CD, the total time of the tracks exceeds the
capacity of the CD-R/RW disc.
Action: Reduce the amount of data or number of songs to
be written, then try again.
CD Read Error!
Cause: An error occurred while reading data from the
CD-R/RW disc.
Action: This may be due to a low-quality or dated disc.
Try using a new CD-R/RW disc.
CD Write Error!
Cause: An error occurred while writing data to the CD-
R/RW disc.
Action: This may be due to a low-quality or dated disc.
Try using a new CD-R/RW disc.
Data Too Large!
Cause 1: You attempted to import an SMF exceeding 250
KB.
Cause 2: You attempted to create a loop phrase using
waveform data thirty minutes or longer.
Action 1: Prepare the SMF to be loaded so that it is no more
than 250 KB.
Action 2: Use waveform data less than thirty minutes long.
Data Too Short!
Cause: 1 You attempted to load a waveform file lasting 0.5
seconds or less.
Cause 2: You attempted to write an audio CD with a track
that is less than four seconds in length.
Cause 3: You attempted to create a loop phrase using
waveform data less than 0.5 seconds in length.
Action 1: Prepare the waveform file so that it is longer than
0.5 seconds.
Action 2: Prepare tracks being written to audio CDs so that
they are at least four seconds long.
Action 3: Use waveform data that is at least 0.5 seconds
long.
Data Type Not Supported!
Cause: You are attempting to load a file or disc in an
incompatible format.
Action: Use a file in a compatible format.
Disc Not Ready!
Cause: There is no CD-R/RW disc in the drive.
Action: Place a CD-R/RW disc in the drive.
Drive Busy!
Cause: The data on the hard disk has become fragmented,
causing delays in reading and writing data.
Action 1: Reduce the number of tracks that are played back
simultaneously. Use track bouncing etc. to
combine tracks, or erase or cut data from tracks
which you do not need to playback, and then try
the playback again.
Action 2: Reduce the number of tracks that are being
recorded simultaneously.
Action 3: Reduce the Data Type (LV1 or LV2), and then try
creating the song again.
Action 4: If using the Rhythm Guide or loop phrases, press
RHYTHM/LOOP [ON/OFF], causing the button's
indicator to go out.
* In cases of unfavorable disk access conditions, such as when
track editing or punch-in recording etc. is used to connect
phrases (musical data) of several seconds.
171