Erasing Cd-Rw Data - Boss BR-1180 Owner's Manual

Using the CD-R/RW to exchange data (BR-1180CD)

Erasing CD-RW data

When using the CD-RW discs, you can erase data and then
write over again.
Be sure to note that carrying out the erase procedure
erases all of the data on the disc.
* You can only erase data with CD-RW discs. CD-R discs
cannot be erased.
1. Place the CD-RW disc to be erased in the CD-R/RW
drive.
2. Press [DATA SAVE/LOAD].
3. Use [CURSOR] to select the "ERASE" icon, then press
[ENTER].
The message "Erase Disc?" appears.
fig.R15-09
4. To erase the disc, press [YES].
* To cancel, press [NO].
Erasing begins, and the progress is indicated in the
display.
When "Completed" appears, the TRACK buttons flash,
and erasing is finished.
* The amount of time required to erase the disc varies according
to the type and amount of data on the disc.
* Once erasing is started and in progress, it cannot be cancelled.
120