Boss BR-1180 Owner's Manual page 134

Other Convenient Functions
3. Use [CURSOR] to select the icon for the parameter you
want to initialize, then press [ENTER].
GLOBAL icon
When this icon is selected, the tuner's reference pitch
and parameters for each of the utility icons are initialized
to their factory settings.
fig.R19-09
EFFECTS icon
When this icon is selected, effect patches U01–U50 are
initialized to their factory settings (with content identical
to that of P01–P50).
fig.R19-10
MIXER icon
If this icon is selected, the mixer parameters will be
initialized to the state they are in immediately after a
new song is created.
fig.R19-11
* Mixer parameters refer to the parameters that are set in the
screens accessed by pressing [PAN], [EQ], [CHORUS/
DELAY], and [REVERB].
ALL icon
If this icon is selected, the global parameters, effect
patches, and mixer parameters will all be initialized.
In addition, the display contrast will also be initialized to
the factory setting.
fig.R19-12
134
* If the current global parameters are initialized, the markers
you assigned to the song, the tempo map you created, and the
scenes you registered will all be lost.
A message asking you to confirm that you want to
initialize the data appears.
fig.R19-70
4. If you wish to initialize, press [YES].
The display will ask again, "Sure?"
5. Press [YES].
To cancel, press [NO].
When you selected the "ALL" icon, the display will ask
"Save Current?"
If you wish to save the current song, the state of the
mixer, and any changes in the song patch before you
execute the Initialize All operation, press [YES]. If you
wish to execute the Initialize All operation without
saving, press [NO].
* If you execute Initialize All without saving, all recording and
editing operations that you performed on the current song, the
current state of the mixer section, and any changes to the song
patch will not be saved.
After the initialization is completed properly, the top
screen returns to the display.