Changing The Insert Effect Connections - Boss BR-1180 Owner's Manual

Changing the insert effect
connections
By default, the insert effect is inserted immediately after the
input source. The reason for this is to allow for the effects-
processed (wet) sound to be recorded and monitored.
However, there may be times when you want to change the
connection order.
On the BR-1180/1180CD, you can change the location of the
insert effect connection to meet a variety of needs.
Follow the procedure below to change where insert effects
are connected.
1. Press [EFFECTS] to access the effect setting screen.
fig.R04-02
2. Use [CURSOR] to move the cursor to the "INSERT"
location.
3. Turn the TIME/VALUE dial to switch the "INSERT."
IN (NORMAL):
The sound is monitored and recorded after it passes
through the insert effect. Normally you will use the BR-
1180/1180CD with this setting.
fig.R04-10
TRACK 1
(REC)
IN (REC DRY):
The sound is monitored after it passes through the insert
effect but recorded before (for the dry sound). Use this
when you want to try out different effects after
recording.
fig.R04-11
TRACK 1
(REC)
Using the insert effects
TRACK 1–8, 1&2, 3&4, 5&6, 7&8, 9&10:
The insert effect can be applied to the playback of a track
(or pair of tracks). Use this when you wish to try out
effects after recording the dry sound, or when you wish
to apply effects only to a specific track.
fig.R04-12
MASTER:
Use this when you wish to apply effects to the entire
song, such as when adjusting the tone or applying a
special effect during mixdown.
fig.R04-13
4. Press [EXIT] several times to return to the top screen.
TRACK 1
(PLAY)
TRACK 1
(PLAY)
TRACK 2
(PLAY)
TRACK 10
(PLAY)
55