Naming A Marker; Stopping Automatically (Marker Stop) - Boss BR-1180 Owner's Manual

Registering a marker in your song—the Marker function
fig.R07-07
At this time you can move the cursor to the measure
display to specify the mark location by measure, or move
the cursor to the time display to specify the mark
location by time.
5. Press [EXIT] several times to return to the top screen.

Naming a marker

1. Press [UTILITY].
2. Use [CURSOR] to select the "MARKER" icon, and
press [ENTER].
fig.R07-05
3. Use CURSOR [
] to move the cursor to "No.," and
rotate the TIME/VALUE dial to specify the number of
the marker that you wish to edit.
fig.R07-06
4. Use CURSOR [
] to move the cursor to "Name," and
use [CURSOR] and the TIME/VALUE dial to edit the
marker name.
fig.R07-08
5. Press [EXIT] several times to return to the top screen.
62
Stopping automatically
(Marker Stop)
You can make song playback stop automatically at marker
locations. If you resume playback, the song will again stop
automatically at the next marker.
1. Press [UTILITY].
2. Use [CURSOR] to select the "SYSTEM" icon, and press
[ENTER].
fig.R07-09
3. Press CURSOR [
] to move the cursor to the
"Marker Stop" position, then rotate the TIME/VALUE
dial to select "ON."
fig.R07-09c
Marker Stop
OFF:
If you want the song to play back without automatically
stopping, select "OFF."
ON:
If you want the song to stop automatically at each
marker, select "ON."
4. Press [EXIT] several times to return to the top screen.