Boss BR-1180 Owner's Manual page 119

Set the following parameters.
START (Start Point):
Specifies the export-source track's start point.
END (End Point):
Specifies the export-source track's end point.
* If, after specifying the above parameters in terms of location
you switch to the measure or marker indication, a "+" may
appear if a discrepancy between the indicated position and the
actual position arises. When using measures or markers to
make the specification, you can use the TIME/VALUE dial in
the respective screen to eliminate the discrepancy.
* If you want the import range to be from the beginning of the
waveform data to the end, select the "ALL" icon and press
[ENTER].
9. When you have finished making the settings, move the
cursor to "GO," then press [ENTER].
The message "Write Speed?" appears.
fig.R16-93
10. Set the write speed.
If the write speed indicated is acceptable, go on to Step 11.
If you want to change the write speed, rotate the TIME/
VALUE dial to change the value, then proceed to Step 11.
Write Speed:
x2 (352 kbps) Writes twice as fast.
x4 (704 kbps) Writes four times as fast.
x8 (1408 kbps) Writes eight times as fast.
* With some media, the range of write speeds may be limited. In
such cases, the values that can be set with the TIME/VALUE
dial may also be limited.
11. Press [ENTER].
The message "Write Sure?" appears.
* To cancel, press [NO].
12. Press [ENTER].
Writing to the CD-R/RW disc begins.
* To quit writing to the disc while writing is still in progress,
press [EXIT]. When the message "Cancel?" appears, press
[YES]; writing is cancelled (it may take some time after you
press [EXIT] for the message to appear). However, no
guarantee can be made for the utility of the content up to the
time writing is cancelled.
Using the CD-R/RW to exchange data (BR-1180CD)
When "Complete!" appears, the writing is finished.
The following types of names can be written to CD-R/
RW discs.
Track 1, V-Track 1
Track 1, V-Track 2
Track 1, V-Track 3
Track 2, V-Track 7
Track 2, V-Track 8
Track 3/4, V-Track 1
Track 3/4, V-Track 2
Track 9/10, V-Track 7
Track 9/10, V-Track 8
* Use "ISO 9660 Level 2, Mode 1" to write the data to the CD-
R/RW disc.
13. Use the application on your computer to copy the data
from the CD-R/RW disc.
TR01___1.WAV or TR01___1.AIF
TR01___2.WAV or TR01___2.AIF
TR01___3.WAV or TR01___3.AIF
:
TR02___7.WAV or TR01___7.AIF
TR02___8.WAV or TR01___8.AIF
:
TR0304_1.WAV or TR0304_1.AIF
TR0304_2.WAV or TR0304_2.AIF
:
TR0910_7.WAV or TR0910_7.AIF
TR0910_8.WAV or TR0910_8.AIF
119