Boss BR-1180 Owner's Manual page 114

Using the CD-R/RW to exchange data (BR-1180CD)
Types of data that can be recovered:
EFFECTS
Insert effect patch user banks are loaded.
MASTERING T.KIT
Mastering Tool Kit user banks are loaded.
SP. MODELING
Speaker modeling user banks are loaded.
RHYTHM/LP.PHRASE
User rhythm arrangements, patterns, and loop phrases
are loaded.
ARRANGE
Only the user rhythm arrangements are loaded.
PATTERN
Only the user rhythm patterns are loaded.
LP PHRASE ALL
User loop phrase Banks A through D are loaded.
LP PHRASE A–H
Only user loop phrase Bank which you selected is
loaded.
If you want to select the "LP PHRASE ALL" or
"LP PHRASE A–H"
Move the cursor to the right, then rotate the TIME/
VALUE dial to select the "ALL" or "A-H."
fig.R16-30
When "LP PHRASE A–H" is selected, further data that
can be recovered appears in the lower part of the screen.
If you want to change the data to be recovered, move the
cursor with the TIME/VALUE dial to specify the data
you want.
If you want to load to all of the data at one time
Move the cursor to "ALL," the press [ENTER].
The message "Recover All?" appears, then press [YES].
Loading from the CD-R/RW disc begins.
To cancel, press [NO].
114
6. Move the cursor to "GO," then press [ENTER].
Loading from the CD-R/RW disc begins.
* If you are in the process of recording a song at this point, the
message "Save Current?" may appear. If you want to save the
current song to the hard disk, press [YES]; press [NO] if you
do not need to save the song. Note, though, that if you do press
[NO], the data currently being recorded will be lost.
* Data saved on the hard disk is overwritten by the recovered
data.
* If the total size of the data you want to load exceeds the
amount of free space available on the hard disk, the message
"HDD Full!" appears, and you cannot continue loading the
data. If this occurs, either reduce the number of songs being
recovered or delete unneeded songs or data from the hard disk,
then continue loading.
* To quit loading while it is still in progress, press [EXIT].
When the message "Cancel?" appears, press [YES]; writing is
cancelled (it may take some time after you press [EXIT] for the
message to appear).
When "Complete!" appears, the loading is finished.