Reverb - Boss BR-1180 Owner's Manual

Reverb

Here's how to make reverb settings for the loop effect.
1. Press [REVERB].
A screen will appear in which you can adjust the volume
that is sent from each track to the reverb (send level).
fig.R05-03
2. Use [CURSOR] to select a track, and rotate the TIME/
VALUE dial to adjust the send level.
* At this time, you can continue pressing CURSOR [
adjust the send level of the input source. You can also continue
pressing CURSOR [ ] and adjust the send level of the
rhythm guide or the loop phrase.
3. Press [REVERB] once again.
The reverb setting screen will appear.
For details on these settings, refer to "Mixer effect
parameter functions" (p. 141).
fig.R05-04
4. Press [EXIT] several times to return to the top screen.
] and
Using the loop effects
57