Boss BR-1180 Owner's Manual page 23

11. MIDI IN Connector
Connectors for receiving MIDI messages. Use by connecting
to the MIDI OUT connectors on external MIDI devices (such
as rhythm machines and sequencers).
12. MIDI OUT Connector
Connectors for sending MIDI data. Use by connecting to the
MIDI IN connectors on external MIDI devices (such as
rhythm machines and sequencers).
13. AC ADAPTOR Jack
Connect the included AC adaptor to this jack.
To prevent accidents, do not use any adaptor other than
the AC adaptor (PSB-3U) provided with the BR-1180/
1180CD.
14. Cord Hook
Wrap the cable around this hook so that the AC adaptor
cable is not pulled out accidentally. If the AC adaptor is
disconnected during operation, your important recorded
data may be lost.
15. Security Slot (
http://www.kensington.com/
Depending on the circumstances of a particular setup,
you may experience a discomforting sensation, or
perceive that the surface feels gritty to the touch when
you touch this device, microphones connected to it, or
the metal portions of other objects, such as guitars.
This is due to an infinitesimal electrical charge, which is
absolutely harmless. However, if you are concerned
about this, connect the ground terminal (see figure
No.16) with an external ground. When the unit is
grounded, a slight hum may occur, depending on the
particulars of your installation.
If you are unsure of the connection method, contact the
nearest Roland Service Center, or an authorized Roland
distributor, as listed on the "Information" sheet.
Unsuitable places for connection
• Water pipes (may result in shock or electrocution)
• Gas pipes (may result in fire or explosion)
• Telephone-line ground or lightning rod (may be
dangerous in the event of lightning)
Panel Descriptions
)
23