Panel Descriptions; Front Panel - Boss BR-1180 Owner's Manual

Panel Descriptions

Front Panel

fig.00-21
2
4
5
9
10
11
12
13
14
16 17 18 28
1. POWER Switch
This is the power switch. It turns the power of the BR-1180/
1180CD on/off.
2. SENS knob
Use this knob to adjust the sensitivity at the input jacks (e.g.,
GUITAR/BASS, MIC 1, and MIC 2).
3. PEAK indicator
This indicator enables you to determine the degree of
distortion in the sound (input source) being input at the
various input jacks (e.g., GUITAR/BASS, MIC 1, and MIC 2).
This indicator lights at a level 6 dB lower than where sound
distortion occurs. Adjust the input sensitivity with the SENS
knob so that this indicator lights only occasionally, at those
moments when you play your guitar (or other instrument) at
its loudest.
4. INPUT SELECT buttons
Use these buttons to select the input source (input jack) that
you wish to record. The indicator of the selected button will
light. You can mute (silence) the input sound by pressing a
button that is lit.
16
3
38 39
19 20 21 22
6 7
8
15
25 26
23 27
24
GUITAR/BASS, MIC 2:
The GUITAR/BASS jack (for guitar or bass) or the MIC 2
jack (for mic) will be selected.
MIC 1:
The MIC 1 jack (for microphone) will be selected.
LINE:
For selecting the LINE jack (stereo) for the line inputs,
such as keyboards or CD players.
SIMUL:
Pressing the GUITAR/BASS, MIC 2 button and the MIC
1 button simultaneously allows you to record using both
of these inputs at the same time. The input sources will
be GUITAR/BASS and MIC 1 if an instrument is
connected to the GUITAR/BASS jack, while MIC 1 and
MIC 2 are selected if a mic is connected to the MIC 2
connector.
* If an instrument and mic are connected to both the GUITAR/
BASS jack and the MIC 2 jack respectively, the GUITAR/
BASS jack will be selected automatically.
* If the INPUT SELECT setting is changed, the insert effect
bank changes automatically (p. 51).
AF method is enabled when either the GUITAR/BASS,
MIC 2 button or MIC 1 button is alone selected.
1
30 31
32
33
35 34
37
36
29