Loading Saved Songs To The Br-1180Cd (User Recover) - Boss BR-1180 Owner's Manual

5. Use [CURSOR] to select the type of data you want to
save, then press [ENTER].
You can register multiple songs. "*" appears at each
registered song. To undo registration of the song, press
[ENTER] once again; "*" is no longer displayed.
Types of data that can be backed up:
EFFECTS
Insert effect patch user banks are saved.
MASTERING T.KIT
Mastering Tool Kit user banks are saved.
SP. MODELING
Speaker modeling user banks are saved.
RHYTHM/LP.PHRASE
User rhythm arrangements, patterns, and loop phrases
are saved.
* You can select all of the above data by moving the cursor to
"ALL" and pressing [ENTER]. Press [ENTER] again to
cancel selection of all of the data.
6. Move the cursor to "GO," then press [ENTER].
The message "Write Speed?" appears.
fig.R16-91
7. Set the write speed.
If the write speed indicated is acceptable, go on to Step 8.
If you want to change the write speed, rotate the TIME/
VALUE dial to change the value, then proceed to Step 8.
Write Speed:
x2 (352 kbps) Writes twice as fast.
x4 (704 kbps) Writes four times as fast.
x8 (1408 kbps) Writes eight times as fast.
* With some media, the range of write speeds may be limited. In
such cases, the values that can be set with the TIME/VALUE
dial may also be limited.
8. Press [ENTER].
The message "Write Sure?" appears.
* To cancel, press [NO].
9. Press [ENTER].
Writing to the CD-R/RW disc begins.
Using the CD-R/RW to exchange data (BR-1180CD)
* If you are in the process of recording a song at this point, the
message "Save Current?" may appear. If you want to save the
current song to the hard disk, press [YES]; press [NO] if you
do not need to save the song. Note, though, that if you do press
[NO], the data currently being recorded will be lost.
* To quit writing to the disc while writing is still in progress,
press [EXIT]. When the message "Cancel?" appears, press
[YES]; writing is cancelled (it may take some time after you
press [EXIT] for the message to appear). However, no
guarantee can be made for the utility of the content up to the
time writing is cancelled.
When "Complete!" appears, the writing is finished.
Loading saved songs to the
BR-1180CD (User Recover)
1. Place the CD-R/RW disc containing the data in the BR-
1180CD's CD-R/RW drive.
2. After the CD-R/RW drive's indicator has stopped
flashing, press [DATA SAVE/LOAD].
3. Use [CURSOR] to select the "RECOVER" icon, then
press [ENTER].
fig.R16-04
4. Using [CURSOR] again to select the "USER" icon, then
press [ENTER].
The list of saved data appears.
fig.R16-53
5. Rotate the TIME/VALUE dial to select the data you
want to load.
113