Editing Markers; Moving Markers; Naming A Marker; Assigning An Audio-Cd Song Division To A Marker - Boss BR-1200CD Owner's Manual

Editing markers

Moving markers

1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the MARKER icon and press
[ENTER/YES].
The Marker screen will appear.
fig.12-05d
3. Use the TIME/VALUE dial to select the number of the
marker you want to edit.
fig.12-06d
4. Move the cursor to "Location", and then use the TIME/
VALUE dial to specify a position for that marker.
fig.12-07d
If you move the cursor to the measure display, you will
be able to specify a marker position in terms of
measures. Alternatively, you can move the cursor to the
time display to move the marker based on the song time.

Naming a marker

A name (Marker Name) can be assigned to any marker from
the Marker screen.
1. On the Marker screen, move the cursor to "No." and
then use the TIME/VALUE dial to select the number of
the marker to be named.
fig.12-08d
Placing markers in your song (Marker)
2. Press [F2] (NAME).
* If not creating a marker, "NAME" will not appear.
3. Use [CURSOR] and the TIME/VALUE dial to change
the marker name.
fig.12-09d
4. To save the changed name, save the song (p. 70).
Assigning an audio-CD song
division to a marker
When writing stereo tracks to an audio CD, you can use a
special procedure to position markers within a track so that
these markers can indicate the song division points on the
finished CD. This method of creating audio CDs is referred
to as Disc At Once By Marker.
For more detailed information regarding Disc At Once
By Marker, refer to "Creating Audio CDs with Audio
Tracks Separated by Markers (Disc At Once by Marker)"
(p. 222).
When on the Marker screen, even normal markers that you
have already positioned can be designated as song division
markers.
1. On the Marker screen, move the cursor to "No." and
then use the TIME/VALUE dial to select the number of
the marker to be designated as a song division.
2. Move the cursor to "CD TRACK" and select "ON"
using the TIME/VALUE dial.
fig.02-0102d
The selected marker will be designated as a song
division marker for the audio CD. At the same time, the
name to be displayed for the corresponding song on the
audio CD (i.e., CD01 to CD99) is automatically set as the
marker name.
Note that if a marker that has already been named is
designated as a song division marker, the original name
will be deleted.
3. Save the current song (p. 70).
91