Saving All The Js-5'S Settings To The Card - Boss JamStation JS-5 Owner's Manual

Chapter 12 Using Memory Cards
Saving All the JS-5's Settings
to the Card
This saves all the data in the User Memory and System
Memory settings in one file. This file is called the "Backup
File".
You can save up to maximum ten Backup Files.
* The number of backup files that can be stored on a memory
card will differ depending on the capacity of the card.
* The backup files are given file names—BACKUP01 through
BACKUP10. These file names cannot be changed.
1. Make sure that a cord is inserted in the MEMORY
CARD slot.
2. Press [UTILITY].
3. Press [CURSOR] to select "13 SYSTEM BACKUP to
CARD?"
The Backup screen appears.
fig.RE12-07
4. Press [ENTER].
The Backup File select screen appears.
fig.RE12-08
If the card does not have enough memory, the following
screen appears, and the data cannot be saved.
* After this appears, the Backup screen returns to the
display.
In such cases, insert another card that does have
sufficient memory, or delete unneeded data (p. 127).
fig.RE12-09
5. Turn [VALUE] to select the Backup File.
* An asterisk ("*") appears when the selected backup file
contains no data.
126
6. Press [ENTER].
The Comment Input screen appears.
You can add a comment (memo) containing up to twelve
characters to the selected backup file.
fig.RE12-10
Cursor
7. Use [CURSOR] and [VALUE] to enter the comments.
If you press [SHIFT] + [
beginning of the comment.
If you press [SHIFT] + [
end of the comment.
If you press [INSERT] ([SHIFT] + [PART]), a space will
be inserted at the cursor location.
If you press [ERASE] ([SHIFT] + [UTILITY]), the
character at the cursor location will be deleted, and
subsequent characters will be moved toward the left to
fill the gap.
If you hold down [SHIFT] and turn [VALUE], uppercase /
lowercase / symbols / (space) / numerals will be
displayed.
8. Repeat Step 7 as needed.
9. Once you have determined the comment, press
[ENTER].
The Backup File confirmation screen appears.
fig.RE12-11
* To cancel, press [EXIT].
10. Press [ENTER].
The backup begins.
fig.RE12-13
Never turn off the power to the JS-5 or remove the memory
card during a backup.
When the backup is finished, the display will indicate
"Completed!"
Comment
], the cursor will move to the
] , the cursor will move to the