Message List - Boss Dr. Sample SP-303 Owner's Manual

Message List

Data Error
❍ The sample data is corrupted.
After pressing [CANCEL] to clear the message from the
display, delete all the samples together (p. 34).
* Corrupted samples cannot be restored.
❍ Pattern data is corrupted. After pressing [CANCEL] to
clear the message from the display, delete all the
patterns together (p. 47).
* Corrupted patterns cannot be restored.
❍ MIDI settings are corrupted.
Simultaneously hold down [EXT SOURCE] while you
switch on the power to restore the MIDI settings to their
original factory settings (p. 58).
❍ Data in the SP-303's internal memory is corrupted.
Initialize the internal memory (p. 68).
❍ Writing data to or reading data from the memory card
failed.
The memory card must be a SmartMedia card of from 8
through 64 MB. And, you need to make sure that the
card has been inserted securely in the memory card slot.
❍ Data on the memory card is corrupted.
Reformat the card on the SP-303 (p. 49).
* Data on memory cards cannot be recovered.
❍ The memory card is damaged.
Obtain a new memory card.
Memory Full
❍ The current sample is in excess of available memory. To
allow further sampling, delete unneeded samples to free
up memory (p. 33, 34). Alternatively, use a new memory
card.
❍ The pattern being recorded is in excess of available
memory.
To allow further sampling, delete unneeded patterns to
free up memory (p. 46, 47). Alternatively, use a new
memory card.
❍ Memory reached capacity during import of .WAV/AIFF
file.
No more data can be imported.
Data Empty
❍ When deleting a sample, all pads with no sample
assigned to it was specified.
❍ When deleting a pattern, all pads with no pattern
assigned to it was specified.
❍ You have attempted to load data from a memory card
onto which no data has been saved.
Format
❍ Formats the memory card (p. 49).
Resampling Level
❍ Adjusts the resampling level (p. 32).
By using the CTRL 3 (LEVEL) knob, you can adjust the
level of the sound being resampled.
Recording
❍ Now sampling is proceeded (p. 28, 29).
❍ Now resampling is proceeded (p. 32).
❍ Recording of pattern is in progress (p. 44).
Exchange
❍ Samples or patterns on two pads are exchanged (p. 34,
47).
Delete
❍ One sample or pattern is deleted (p. 33, 46).
Delete All
❍ All samples or patterns are deleted in a single group (p.
34, 47).
Appendices
69