Saving A Memory; Saving A Memory (Write); Erasing Data From A Memory (Clear) - Boss RC-505 MKII Owner's Manual

Saving a Memory

Saving a Memory (WRITE)

If you select a different memory or turn off the power after
recording or editing the settings, the recorded content or edited
settings are lost. If you want to keep the data, you must save it.
1 .
Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE screen appears.
2 .
Press the [1] or [2] (WRITE) knob.
3 .
Turn the [1]–[4] knobs to select the memory to which
you want to save.
5 This procedure is not required if the memory number is
acceptable as is.
5 If you decide to cancel, press the [EXIT] button.
4 .
Press the [ENTER] button.
The memory is saved.
* Make sure not turn to off the power while the "EXECUTING... "
message is shown.
MEMO
You can assign a name to the memory. For details, refer to
"Parameter Guide" (PDF).
12

Erasing Data from a Memory (CLEAR)

You can erase the data that is saved in a memory, clearing that
memory to an empty state.
1 .
Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE screen appears.
2 .
Press the [3] or [4] (CLEAR) knob.
3 .
Turn the [1]–[4] knobs to select the memory you want
to clear.
5 This procedure is not required if the memory number is
acceptable as is.
5 If you decide to cancel, press the [EXIT] button.
4 .
Press the [ENTER] button.
The memory will be cleared.
* Make sure not turn to off the power while the "EXECUTING... "
message is shown.