Installing The Psu Backplane Unit - Fujitsu M10-4 Service Manual

Tighten the screws on the operation panel to secure it to the PSU backplane
3.
unit.
13.6.2

Installing the PSU backplane unit

This section describes the procedure for installing the PSU backplane unit.
Insert the PSU backplane unit into the chassis by holding the handle.
1.
Tighten the two screws on the PSU backplane unit to secure it to the chassis.
2.
Reinstall the fan shelf and then tighten the two screws in the fan slot.
3.
The FRU installation work is completed. See
continue maintenance work.
"Chapter 7 Maintenance
Chapter 13 Maintaining the PSU Backplane Unit/Operation Panel
Flow" to
317