System-Stopped Addition - Fujitsu M10-4 Service Manual

7.3.3

System-stopped addition

This section describes the workflows for system-stopped/hot and system-stopped/
cold FRU installation. References to detailed descriptions are written in the
workflow. See any of them as required.
System-stopped addition has the following patterns:
System-stopped/hot addition (for an internal disk or PCIe card)
■
System-stopped/cold addition (for a single-chassis configuration)
■
System-stopped/cold addition (for a building block configuration)
■
System-stopped/hot addition (for an internal disk or PCIe card)
System-stopped/hot addition can be performed on a PCI Express card and an internal
disk. Perform the following procedure to install the unit.
174 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023