Fujitsu M10-4 Service Manual page 386

Location No.
1
E.2 Removing the Lithium Battery
This section describes the procedure for removing the lithium battery.
Insert a flathead screwdriver or another fine-tipped tool between the lithium
1.
battery and battery holder, and pry the battery from the holder.
Figure E-2 Removing the lithium battery (1)
Gripping the lithium battery at the top with needle-nose pliers or another
2.
fine-tipped tool, pull up the lithium battery to remove it.
Figure E-3 Removing the lithium battery (2)
372 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
Component
Lithium battery