Fujitsu M10-4 Service Manual page 132

Hide thumbs Also See for M10-4:
Table of Contents

Advertisement

Start configuring PSB to Logical Domains (LDoms) Manager. [1800sec]
0.....end
Configured PSB to Logical Domains (LDoms) Manager.
Operation has completed.
Note - If you execute the addboard command without specifying the -m option or with
bind=resource specified for the -m option, the resource assignment state before deleteboard
command execution may not be restored.
If the amount of system board (PSB) resources, such as CPUs and memory, before
replacement differs from that after replacement, you cannot restore the original resource
assignment state to the original state. If the resource assignment state is not restored to the
original state, the resources are placed in the free resource state. In this case, execute the ldm
command to assign the resources to the logical domain again.
3.
Execute the showresult command to check the end status of the addboard
command that was just executed.
The following example shows that "0" is returned as the end status and the
execution of the addboard command has been completed successfully.
XSCF> showresult
0
4.
Execute the showboards command to confirm that the chassis requiring
maintenance has been incorporated into the physical partition.
The BB-ID of the server requiring maintenance is indicated by the system board
(PSB) number.
In the following example, [Fault] of PSB 00-0 displays "Normal", which indicates
that the system board is operating normally.
XSCF> showboards -a
PSB
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00)
01-0 00(01)
02-0 00(02)
03-0 00(03)
5.
Execute the showstatus command to confirm that the FRU is operating
normally after the completion of maintenance.
Nothing is displayed when it is normal.
XSCF> showstatus
Execute the showhardconf command to check the hardware configuration
6.
and the status of each FRU.
Confirm that no asterisk (*) is displayed in front of any FRU.
118
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ June 2023
PPAR-ID(LSB) Assignment
Assigned
Assigned
Assigned
Assigned
Pwr
Conn Conf Test
y
y
y
Passed
y
y
y
Passed
y
y
y
Passed
y
y
y
Passed
Fault
Normal
Normal
Normal
Normal

Advertisement

Table of Contents
loading

This manual is also suitable for:

M10-4sSparc m10-4Sparc m10-4s

Table of Contents