General Information About Xcp 1093; Supported Firmware And Software - Fujitsu SPARC Enterprise M3000 Product Notes

General Information About XCP 1093

This section describes the general information about XCP 1093.
"Supported Firmware and Software" on page 1
■
"Updating to XCP 1093" on page 3
■
"Functionality Issues and Limitations" on page 3
■

Supported Firmware and Software

The following firmware and operating system (OS) are supported depending on the
processors being installed on the SPARC Enterprise M3000 server..
Supported Firmware and Operating System Versions
TABLE 1
Installed Processors
SPARC64 VII processors
2.52GHz
2.75GHz
Note – XCP 1080 is the first XCP release for the SPARC Enterprise M3000 server.
Note – 8GB DIMM is supported in XCP 1081 or later.
XCP Version Operating System Version
XCP 1080 or later Solaris 10 5/08 or later, with required
patches
XCP 1091 or later Solaris 10 10/08 or later
1